Solid phase extraction of smoke components from peat combustion by Magic Chemisorber PDMS and thermal desorption-GC/MS analysis
Category No. MCA-022E
Technical Info
Technical Note
Solid phase extraction of smoke components from peat combustion by Magic Chemisorber PDMS and thermal desorption-GC/MS analysis
Trace analysis of acrylic copolymers using pyrolysis (Py)-GC/MS with F-Splitless injection Part 3: Calibration curves and reproducibilities of peak areas of monomers
Category No. PYA1-162E
Trace analysis of acrylic copolymers using pyrolysis (Py)-GC/MS with F-Splitless injection Part 2: Enhanced sensitivity by F-Splitless injection method
Category No. PYA1-161E
Trace analysis of acrylic copolymers using pyrolysis (Py)-GC/MS with F-Splitless injection Part 1: Comparison of pyrograms obtained with various injection methods
Category No. PYA1-160E
Aromatic hydrocarbon selectivity in CaO-catalyzed PET pyrolysis using Tandem μ-Reactor-GC/MS
Category No. RXA-009E
Curing analysis of two-component epoxy resins Part 2: Pyrolysis (Py)-GC/MS
Category No. PYA1-159E
Curing analysis of two-component epoxy resins Part 1: Evolved Gas Analysis (EGA)-MS
Category No. PYA3-047E
Effects of measurement conditions on peak temperature in Evolved Gas Analysis (EGA)-MS Part 2: Furnace temperature ramp rate
Category No. PYA3-046E
Effects of measurement conditions on peak temperature in Evolved Gas Analysis (EGA)-MS Part 1: Sample amount
Category No. PYA3-045E
Determination of phthalate in edible oil by thermal desorption GC/MS Part 3: Determination of DEHP using thermal desorption GC/MS
Category No. PYA1-158E
Determination of phthalate in edible oil by thermal desorption GC/MS Part 2: Optimization of analytical conditions for thermal desorption GC/MS
Category No. PYA3-044E
Determination of phthalate in edible oil by thermal desorption GC/MS Part 1: Thermal desorption temperature of DEHP in evolved gas analysis (EGA)-MS
Category No. PYA3-043E
Determination of ketamine in hair by thermal desorption-GC/MS
Category No. PYA1-137E
Determination of methamphetamine and 3,4-methylenedioxy-methamphetamine in hair by thermal desorption-GC/MS
Category No. PYA1-136E
High-sensitivity detection of polystyrene by pyrolysis (Py)-GC/MS using F-Splitless injection method Part 4 LOD, LOQ, and S/N of polystyrene pyrolyzates
Category No. PYA1-157E
High-sensitivity detection of polystyrene by pyrolysis (Py)-GC/MS using F-Splitless injection method Part 3 Calibration curves for polystyrene pyrolyzates
Category No. PYA1-156E
High-sensitivity detection of polystyrene by pyrolysis (Py)-GC/MS using F-Splitless injection method Part 2 Styrene trimer/monomer peak area ratios (SSS/S) and reproducibilities by injection methods
Category No. PYA1-155E
High-sensitivity detection of polystyrene by pyrolysis (Py)-GC/MS using F-Splitless injection method Part 1 Features of pyrograms obtained with different injection methods
Category No. PYA1-154E
Development of phthalate-free quartz discs that prevent scattering of powdered samples out from Eco-Cup Part 2: Quantification of Phthalates
Category No. PYA1-153E
Development of phthalate-free quartz discs that prevent scattering of powdered samples out from Eco-Cup Part 1: Effect of quartz disc and comparison with quartz wool
Category No. PYA1-152E