Pyrolysis of CFRP and reforming of gases by zeolite catalysts in CFRP recycling Part 3: Searching for optimal catalytic reaction conditions
Category No. RXA-008E
Technical Info
Technical Note
Pyrolysis of CFRP and reforming of gases by zeolite catalysts in CFRP recycling Part 3: Searching for optimal catalytic reaction conditions
Pyrolysis of CFRP and reforming of gases by zeolite catalysts in CFRP recycling Part 2: Evaluation of catalysts with varied Si/Al ratios
Category No. PYA1-117E
Pyrolysis of CFRP and reforming of gases by zeolite catalysts in CFRP recycling Part 1: Screening of zeolite catalysts
Category No. PYA1-116E
Analysis of tire rubbers Part 2 Identification of rubber constituents by Pyrolysis-GC/MS
Category No. PYA1-115E
Analysis of tire rubbers Part 1 Additives analysis by thermal desorption-GC/MS
Category No. PYA1-114E
Catalytic fast pyrolysis of biomass using Pyrolysis (Py)-GC/MS Part 2: Cellulose
Category No. PYA1-113E
Catalytic fast pyrolysis of biomass using Pyrolysis (Py)-GC/MS Part 1: Lignin
Category No. PYA1-112E
Effect of pressure on catalytic conversion efficiency - Catalytic reaction of glycerin with a Pd catalyst -
Category No. RXA-007E
Analysis of microplastics using pyrolysis (Py)-GC/MS Part 2: Identification of colored marine microplastics
Category No. PYA1-111E
Analysis of microplastics using pyrolysis (Py)-GC/MS Part 1: Identification of white marine microplastics
Category No. PYA1-110E
Operating principle of High-Pressure Flow Controller which allows catalyst screening at varied pressures
Category No. RXT-003E
Operating principle of medium pressure flow controller that allows catalyst screening at varied pressures
Category No. RXT-002E
Analysis of additives in butadiene rubber using thermal desorption (TD)-GC/MS
Category No. PYA1-109E
Analysis of the stabilization mechanism of heat-treated polyacrylonitrile-based carbon fiber precursors Part 2 Analysis of evolved gases from precursors with varied heat-treatment times
Category No. PYA1-108E
Analysis of the stabilization mechanism of heat-treated polyacrylonitrile-based carbon fiber precursors Part 1 Evolved gas analysis of precursors with varied processing times
Category No. PYA1-107E
Evaluation of deterioration degree of exterior wall coatings using Micro-UV Irradiator - Part 2 Correlation between Micro UV-Irradiator and Metal Halide Weather Meter
Category No. PYA5-011E
Evaluation of deterioration degree of exterior wall coatings using Micro-UV Irradiator - Part 1 Acrylic coatings with and without UV absorber and HALS
Category No. PYA5-010E
Defect analysis of electronic devices - clouded optical components -
Category No. PYA1-106E
Development of UA guard column for UA PBDE column for phthalate analysis Part 3: Quantitative analysis
Category No. UAT-010E
Development of UA guard column for UA-PBDE column for phthalates analysis Part 2: Effectiveness of UA guard column
Category No. UAT-009E