We will have an exhibition booth.

Thursday, Nov. 5

[Poster session I]　 9:40~11:05 (JST)

[Poster presentation I]　11:15~12:45 (JST)

• Development of an additive analysis method by solid-phase transfer with fine silica and thermal desorption GC/MS analysis (I-12)
• Highly sensitive analysis of brominated pyrolyzates by Py-GC/NICI-MS (I-18)*
• In-line analysis of high-boiling pyrolyzates by Py-GC/MS and a pyrolysis-gas-phase derivatization method (I-24)*
• Quantitative analysis of PVC in atmospheric particulate matter using pyrolysis GC/MS (I-32)*

[Poster session II]　 14:40~16:15 (JST)

[Poster presentation II]　16:25~17:55 (JST)

• Development of a new pyrolysis system aimed at improving the convenience in polymer material analysis (II-8)
• Effect of TMAH addition amount on simultaneous quantitative analysis of multiple polymers by pyrolysis GC/MS (II-11)
• Evaluation of detection characteristics of fluorinated polymer pyrolyzates by Py-GC/NICI-MS (II-14)*

Friday, Nov. 6

[Poster session III]　 9:00~10:35 (JST)

[Poster presentation III]　10:45~12:15 (JST)

• Elucidation and resolution of the abnormal peak phenomena in the medium-boiling-point range in pyrolysis capillary GC (III-9)
• In-line analysis of the pyrolysis and combustion behavior of chlorinated resins by Py-GC/MS with an air-dilution flow path (III-18)*
• Investigation of a rapid analysis method for fluorinated polymers using pyrolysis GC/MS (III-24)

[Poster session IV]　 13:10~14:30 (JST)

[Poster presentation IV]　14:40~16:10 (JST)

• Fundamental characteristics and applications of a pyrolysis system employing a dual quartz pyrolysis tube (IV-12)
• Development of an online GC/MS system for the analysis of polymer combustion gases in air using a pyrolyzer and a corona discharge ignition method (IV-14)
• Development of a size-fractionated microplastic collection method using an aerosol sampler with automatic filter exchange (IV-18)

*Joint presentation

Thank you for visiting our booth.

Tuesday, Sep. 15

【Oral Presentation】

• Effect of glass fiber filters in an underwater microplastic collector on pyrolysis behavior of polymers
  (15:00~15:15 / D1101)
• Improved pyrolysis-GC/MS method for simultaneous quantification of multiple polymers
  (15:15~15:30 / D1102)
• Py-GC/MS analysis of atmospheric microplastics using a Fine/Coarse fractionating aerosol sampler
  (15:30~15:45 / D1103)
• Rapid analysis of fluoropolymers using pyrolysis-GC/MS
  (15:45~16:00 / D1104)
• Effects of GC inlet pressure and total carrier gas flow rate on polymer pyrograms
  (16:00~16:15 / H1104)
• Suppression of abnormal peaks in the medium-boiling range during pyrolysis capillary GC: Effects of GC insert packing material
  (16:15~16:30 / H1105)

Wednesday, Sep. 16

【Oral Presentation】

• Development of an online GC/MS system for analyzing polymer combustion gases in air using a pyrolyzer and corona discharge ignition
  (9:30~9:45 / B2002)
• Development of a thermal desorption GC/MS method for additive analysis using fine silica-assisted solid-phase transfer
  (9:45~10:00 / B2003)
• Elucidation of the causes of abnormal peaks in GC analysis of polymer pyrolysis: Solving a 40-year-old mystery
  (10:00~10:30 / B2004T)

【Poster Presentation】 ※All poster presentations are joint presentations.

• Quantitative analysis of micro/nanoplastics by pyrolysis-GC/MS: Evaluation of internal standards
  (11:00~12:30 / Y2020)
• Quantitative analysis of micro/nanoplastics by pyrolysis-GC/MS: Evaluation of the effects of extraction solvents and diluents
  (11:00~12:30 / Y2021)
• Measurement of atmospheric micro and nanoplastic mass concentrrations by TD/Py-GC/MS (2): Comparison with particle number concentrations in tropical regions
  (11:00~12:30 / Y2025)

We presented invited talks.

Wednesday, July 1

Invited talks I　11:00~11:20 (MYT)

• Recent Developments in Hardware and Software for the Analysis of Trace Micro- and Nanoplastics by
  Py-GC/MS

Thursday, July 2

Invited talks II　11:00~11:20 (MYT)

• Recent Advances in Airborne Micro- and Nanoplastics Analysis Using Pyrolysis-GC/MS

Invited talks III　11:20~11:40 (MYT)

• Regional Interlaboratory Study to Improve Quality in Microplastics Measurements

We were supporting the event as a Gold Sponsor.

Thank you for visiting our booth.

[Oral presentation]

Date: Tuesday, June 9

Time: 3:50pm – 4:10pm

• Fundamental Study on Abnormal Peak Appearance in the Mid-Boiling Range in Pyrolysis-GC/MS

[Poster presentation]

Date: Monday, June 8

• Enhanced Processing Ability with a Newly Designed Underwater Microparticle Collection Device for Pyrolysis-GC/MS of Microplastics
• Quantitative Analysis of Trace PTFE in Polymer Materials by Double-Shot Pyrolysis-GC/MS

[Poster presentation]

March 24, 2026 (Tue) Venu: Institute of Science Tokyo, Ookayama Campus

• Rapid evaluation of methanol conversion reaction with a ZSM-5 catalyst using a micro-reactor directly interfaced to a GC/MS (Poster No. 2P-37/12:20-13:50)