Smart Fine Particle Collector (SFPC) for collecting microplastics in drinking water －Features of SFPC and basic performance with Collection-Cup method－
Category No. PYT-043E
Technical Info
Technical Note
Smart Fine Particle Collector (SFPC) for collecting microplastics in drinking water －Features of SFPC and basic performance with Collection-Cup method－
Quantitative analysis of airborne microplastics by pyrolysis-GC/MS Part 3: Determination of polymer components
Category No. PYA1-185E
Quantitative analysis of airborne microplastics by pyrolysis-GC/MS Part 2: Identification of volatiles and polymers by double-shot method
Category No. PYA1-184E
Quantitative analysis of airborne microplastics by pyrolysis-GC/MS Part 1: Preliminary study by evolved gas analysis (EGA)-MS
Category No. PYA3-050E
Usefulness of backflush combined with Smart Pre-Column in pyrolysis-GC/MS measurements
Category No. PYA1-181E
Qualitative and quantitative analysis of a multilayer polymer film by pyrolysis GC/MS combined with F-Search MPs
Category No. PYA1-167E
Development of rod-shaped grinding media for cryogenic mill Part 1: Comparison with spherical grinding media
Category No. PYT-040E
High-sensitivity detection of polyethylene by pyrolysis GC/MS using F-Splitless Injection method Part 2: S/N values for different injection methods
Category No. PYA1-166E
High-sensitivity detection of polyethylene by pyrolysis GC/MS using F-Splitless Injection method Part 1: Pyrograms obtained by split and F-Splitless Injection methods
Category No. PYA1-165E
Reproducibility in pyrolysis GC/MS of trace solid polymers - Particle size of polyethylene terephthalate and the reproducibility -
Category No. PYA1-164E
High-sensitivity detection of polystyrene by pyrolysis (Py)-GC/MS using F-Splitless injection method Part 4 LOD, LOQ, and S/N of polystyrene pyrolyzates
Category No. PYA1-157E
High-sensitivity detection of polystyrene by pyrolysis (Py)-GC/MS using F-Splitless injection method Part 3 Calibration curves for polystyrene pyrolyzates
Category No. PYA1-156E
High-sensitivity detection of polystyrene by pyrolysis (Py)-GC/MS using F-Splitless injection method Part 2 Styrene trimer/monomer peak area ratios (SSS/S) and reproducibilities by injection methods
Category No. PYA1-155E
High-sensitivity detection of polystyrene by pyrolysis (Py)-GC/MS using F-Splitless injection method Part 1 Features of pyrograms obtained with different injection methods
Category No. PYA1-154E
Analysis of trace microplastics (MPs) in sediment samples Part 2: Pyrogram and qualitative/quantitative results of sediment sample
Category No. PYA1-151E
Analysis of trace microplastics (MPs) in sediment samples Part 1: F-Splitless Py-GC/MS using Multi-Functional Splitless Sampler
Category No. PYA1-150E
Development of a Multi-Functional Splitless Sampler and its operating mechanism Part 2: Operating mechanism of Backflush
Category No. PYT-038E
Development of a Multi-Functional Splitless Sampler and its operating mechanism Part 1: Operating mechanism of F-Splitless Py-GC/MS
Category No. PYT-037E
Preparation and evaluation of calibration standard for microplastic (MP) analysis using CaCO3 as a diluent Part 3: Calibration curves for polymers in MPs-CaCO3
Category No. PYA1-148E
Preparation and evaluation of calibration standard for microplastic (MP) analysis using CaCO3 as a diluent Part 2: Pyrogram of MPs-CaCO3
Category No. PYA1-147E