New approach for the kinetic analysis of cellulose using EGA-MS
Y.-M. Kim et al., Polym. Test. 60 (2017) 12-17
Category No. 2017-03
Technical Info
Publications
New approach for the kinetic analysis of cellulose using EGA-MS
In-Situ Catalytic Pyrolysis of Dealkaline Lignin Over MZ-Hβ
Y.-M. Kim et al., J. Nanosci. Nanotechnol. 17 (2017) 2760-2763
Category No. 2017-02
Catalytic Pyrolysis of Waste Wood Plastic Composite Over H-V-MCM-41 Catalysts
H. W. Lee et al., Sci. Adv. Mater. 9 (2017) 934-937
Category No. 2017-01
Characterization of soil organic matter with different degrees of humification using evolved gas analysis-mass spectrometry
N. Katsumi et al., Talanta 155 (2016) 28-37
Category No. 2016-09
Production of aromatic hydrocarbons via catalytic co-pyrolysis of torrefied cellulose and polypropylene
H. W. Lee et al., Energ. Convers. Manage. 129 (2016) 81-88
Category No. 2016-08
Catalytic pyrolysis of lignin using a two-stage fixed bed reactor comprised of in-situ natural zeolite and ex-situ HZSM-5
H. W. Lee et al., J. Anal. Appl. Pyrol. 122 (2016) 282-288
Category No. 2016-07
Catalytic copyrolysis of cellulose and thermoplastics over HZSM-5 and HY
B.-S. Kim et al., ACS Sustainable Chem. Eng. 4 (2016) 1354-1363
Category No. 2016-06
Development of a multi-sample micro UV irradiator for accelerated deterioration of polymers
K. Matsui et al., Polym. Test. 56 (2016) 54-57
Category No. 2016-05
Comparative study of TD and solvent extraction-GC/MS analysis for the quantification of phthalates in polymers
Y-M. Kim et al., J. Chromatogr. A 1451 (2016) 33-40
Category No. 2016-04
Ex-situ catalytic pyrolysis of citrus fruit peels over mesoporous MFI and Al-MCM-41
Y-M. Kim et al., Energ. Convers. Manage. 125 (2016) 277-289
Category No. 2016-03
Hydrogenation Reactions during Py-GC/MS Analysis of Polymer Samples Using Hydrogen Carrier Gas
A. Watanabe et al., Anal. Chem. 88 (2016) 5462-5468
Category No. 2016-01
Pyrolysis and catalytic upgrading of Citrus unshiu peel
B-S. Kim et al., Bioresource Technol. 194 (2015) 312-319
Category No. 2015-08
Analytical pyrolysis of waste paper laminated phenolic-printed circuit board (PLP-PCB)
Y-M. Kim et al., J. Anal. Appl. Pyrol. 115 (2015) 87-95
Category No. 2015-07
Quantitative Analysis of Stearic Acid in Vulcanized Styrene-butadiene Rubber by Thermally Assisted Hydrolysis and Methylation Using GC/MS
A. Watanabe et al., NIPPON GOMU KYOKAISHI 88 (2015) 216-220
Category No. 2015-06
Analytical pyrolysis properties of waste medium-density fiberboard and particle board
T. U. Han et al., J. Ind. Eng. Chem. 32 (2015) 345-352
Category No. 2015-05
Material characterization using a Tandem micro-Reactor–GC–MS
R.R. Freeman et al., J. Anal. Appl. Pyrol. 111 (2015) 41-46
Category No. 2015-04
Polymer-coated sample cup for quantitative analysis of semi-volatile phthalates in polymeric materials by TD-GC/MS
A. Hosaka et al., J. Chromatogr. A 1391 (2015) 88-92
Category No. 2015-03
Thermoanalytical characterization of polymers: A comparative study between thermogravimetry and EGA using a temperature-programmable pyrolyzer
A. Shiono et al., Polym. Test. 42 (2015) 54-61
Category No. 2015-02
Non-Isothermal Pyrolysis of Citrus Unshiu Peel
Y-M Kim et al., Bioenergy Res. 8 (2015) 431-439
Category No. 2015-01
A new technique for the rapid characterization of catalysts: Tandem micro-reactor-GC/MS
C. Watanabe et al., Environ. Prog. Sustain. Energy. 33 (2014) 688-692
Category No. 2014-04