1. Analysis of acrylic adhesives using pyrolysis GC/MS (Oral)
2. Chemical structural analysis of dendrimers using pyrolysis GC/MS (Oral)
3. Screening of zeolite catalysts for dealkylation of alkyl phenols using Tandem μ-Reactor-GC/MS (Oral)
4. Online analysis of liquefaction products of polyethylene terephthalate using Tandem μ-Reactor-GC/MS (Oral)
5. Development of a solid phase extraction device with polar liquid stationary phase and its application (SOral)
6. Development of micro-spring coil that is chemically bound with non-polar stationary phase and is used for solid phase extraction (Oral)

1. New pyrolysis-GC/MS system incorporated with On-line Micro-UV Irradiation for rapid evaluation of photo, thermal, and oxidative degradation of polymers: studies on EPDM and HIPS (Poster)
   

In addition to the poster presentation, a short presentation (poster pitch) will be held during 10:20 – 10:50 am on Aug. 29.

Thank you for visiting our booth.

1. New pyrolysis-GC/MS system incorporated with On-line Micro-UV Irradiation for rapid evaluation of photo, thermal, and oxidative degradation of polymers: studies on EPDM and HIPS (Oral)

Thank you for visiting our booth.

1. Pyrolyse-GC/MS zur Charakterisierung synthetischer Polymere: Methoden und Anwendungsbeispiele (Oral, German)

Thank you for visiting our booth.

1. On-line analysis of catalytic reaction products using a High Pressure Tandem Micro-reactor GC/MS (Oral)
2. Evolved gas analysis (EGA)-MS of polymeric materials under air atmosphere using furnace type pyrolyzer (Oral)
3. Study on discoloration of polyvinylchloride sheet material by evolved gas analysis and pyrolysis-GC/MS analysis (Poster)
4. Catalytic copyrolysis of torrefied cork oak and high density polyethylene over mesoporous HY catalysts (Poster)
5. A comparative study between thermogravimetry and evolved gas analysis for polymers using a temperature-programmable pyrolyzer-MS (Poster)
6. Recent developed technologies for polymer analysis (Poster)

1. Selected applications reveal strategies for material and polymer characterization with pyrolysis-gas chromatography/mass spectrometry (PY-GC/MS)
2. Practical pyrolysis-GC-MS for polymer and material characterization

Thank you for visiting our booth.

1. New pyrolysis-GC/MS system incorporated with On-line Micro-UV Irradiation for rapid evaluation of photo, thermal, and oxidative degradation of polymers: studies on EPDM and HIPS (Oral)