Evolved Gas Analysis (EGA)-MS in Air Atmosphere Part 3: Optimum flow rate of additional helium
Category No. PYA3-035E
Technical Info
Technical Note
Evolved Gas Analysis (EGA)-MS in Air Atmosphere Part 3: Optimum flow rate of additional helium
Evolved Gas Analysis (EGA)-MS in Air Atmosphere Part 2: EGA thermograms of PS obtained in varied atmospheric gases
Category No. PYA3-034E
Evolved Gas Analysis (EGA)-MS in Air Atmosphere Part 1 A new flow system suitable for thermo-oxidative atmosphere
Category No. PYA3-033E
Analysis of a Biodegradable Plastic Bag Part 2: Pyrolysis (Py)-GC/MS and Thermal desorption (TD)-GC/MS
Category No. PYA1-121E
Analysis of a Biodegradable Plastic Bag Part 1: Evolved Gas Analysis (EGA)-MS
Category No. PYA3-029E
Analysis of polymers/additives in three types of cable materials Part 5 Thermal desorption (TD)-GC/MS and pyrolysis (Py)-GC/MS of Pellet C
Category No. PYA1-125E
Analysis of polymers/additives in three types of cable materials Part 4 Thermal desorption (TD)-GC/MS and Pyrolysis (Py)-GC/MS of Pellet B
Category No. PYA1-124E
Analysis of polymers/additives in three types of cable materials Part 3 Evolved gas analysis (EGA)-MS of Pellets B and C
Category No. PYA3-032E
Analysis of polymers/additives in three types of cable materials Part 2 Double-shot analysis of Pellet A
Category No. PYA1-123E
Analysis of polymers/additives in three types of cable materials Part 1 Evolved gas analysis (EGA)-MS of Pellet A
Category No. PYA3-031E
Analysis of biomass plastic bags Part 3: Thermal desorption (TD)-GC/MS
Category No. PYA1-120E
Analysis of biomass plastic bags Part 2: Pyrolysis (Py)-GC/MS
Category No. PYA1-119E
Analysis of biomass plastic bags Part 1: Evolve gas analysis (EGA)-MS
Category No. PYA3-028E
Compositional analysis of thermoplastic polyurethanes using Pyrolysis (Py)-GC/MS
Category No. PYA1-118E
Analysis of tire rubbers Part 2 Identification of rubber constituents by Pyrolysis-GC/MS
Category No. PYA1-115E
Analysis of tire rubbers Part 1 Additives analysis by thermal desorption-GC/MS
Category No. PYA1-114E
Analysis of additives in butadiene rubber using thermal desorption (TD)-GC/MS
Category No. PYA1-109E
Analysis of the stabilization mechanism of heat-treated polyacrylonitrile-based carbon fiber precursors Part 2 Analysis of evolved gases from precursors with varied heat-treatment times
Category No. PYA1-108E
Analysis of the stabilization mechanism of heat-treated polyacrylonitrile-based carbon fiber precursors Part 1 Evolved gas analysis of precursors with varied processing times
Category No. PYA1-107E
Development of UA guard column for UA PBDE column for phthalate analysis Part 3: Quantitative analysis
Category No. UAT-010E